Why solid walls aren't soaked

0:06 videoPosted 27 February 2026

Solid walls were never designed to be waterproof, and that surprises a lot of people. Before membranes, cavity walls and plastic-based coatings, buildings worked on the assumption that some moisture would always get in.

This video explains how that works. Rain hits the masonry and a little moisture enters, but solid walls are thick and made from porous materials such as brick, stone and lime mortar. They absorb a small amount of water and then release it again. Heat helps drive moisture outward and airflow helps it leave, so the wall dries because nothing is trapping it.

Trouble tends to start when that drying cycle is interrupted. Cement renders, plastic paints and sealed finishes can slow or block evaporation, and when moisture cannot escape easily it builds up and walls begin to feel damp. The message is that water getting into a wall is not automatically the issue. Water that cannot get back out is.

See the original on Instagram
Transcript

If solid walls aren't waterproof, why aren't they soaked through?

Because they aren't built to totally block the water.

They're built to manage it.

Rain hits the surface.

Some moisture enters.

The wall absorbs a little.

Thickness slows it down.

Then heat moves it. Air carries it out.

Nothing is sealed tight.

Everything can dry.

Water isn't the problem.

Trapped water is.

Trapped behind that failing plastic paint that is 'standard use'

Products we recommend

Questions about this video

Ask a question about this video

We reply by email, and we may add your question and our answer to this page (without your name).

More videos like this

See all our videos