OSMO COUNTRY COLOUR

The wood surface must be clean and dry with no frost present. The moisture content should not exceed 20%. When applying Osmo Country Colour stain, make sure that it is not thinned; it should be ready-to-use straight from the can or container. Stir well before use. If possible, apply the first coat of stain on all sides before installation.

Ensure that any microporous stains are completely removed and all paints and lacquers have been completely removed as well prior to application of Osmo Country Colour. Sanding works should always involve wearing a dust mask for safety reasons. Additionally, keep in mind that there may be factors that influence the finished surface of your project, so it is always wise to do a trial application beforehand if you are unfamiliar with the area you are staining or if you have never used Osmo Country Colour before.

With a brush or roller, apply thinly and evenly to the clean and dry wood along the wood grain and spread well. Allow to dry for approx. 10-12 hours under good ventilation. After drying, apply a second coat – also thinly. For renovation works, one coat applied to the clean and dry surface is usually sufficient.

Care:-
Regular Cleaning: Damp cleaning with Osmo Decking Cleaner using Osmo Decking Cleaning Brush.

Occasional Maintenance: If necessary, intensive cleaning and refreshing using Osmo Wood Reviver Power Gel or Osmo Gard Clean.

Recoating: Simply re-apply one coat onto the clean and dry surface when signs of wear become visible.

26m²/L with one coat. Requires two coats.

Based on natural plant oils (sunflower oil, soya oil and thistle oil), iron oxide and organic pigments, titanium dioxide white pigment, siccatives (drying agents) and water-repellent additives. Dearomatized white spirit (benzene-free). EU limit value for this product (cat. A/e): 400 g/l VOC (2010). This product contains max. 400 g/l VOC.



As purveyors of Osmo Country Colour at Greenshop Paints, our pride is in our comprehensive inventory of natural paint.