Surface Preparation:
Surfaces must be clean, dry, free from all defective or poorly adhering material, dirt, grease, wax etc.
Thoroughly rub down previously painted surfaces, using ‘wet flatting’ (wet & dry paper used wet) method where possible, then wipe off with a damp, lint free cloth.
Treat any knots in wood with an appropriate knotting solution.
Ferrous metals: remove any loose rust and mechanically abrade and degrease prior to painting.
Application Details:
Stir thoroughly before use.
New or bare surfaces: 2 coats of Universal Primer Undercoat.
Previously painted surfaces: 1 coat of Universal Primer Undercoat.
Allow to dry for a minimum of 2 hours between coats.
Cleaning tools:
Wash brushes out with soap and water.