Treatex Colour Tone

Show more

Preparation:

Sand the surface to smooth bare wood using 80-120 grit sandpaper. Ensure that any previous finish has been fully removed. Remove dust, dirt and any other contaminates which may lead to uneven absorption of Colour Tones. Make sure the surface to be treated is thoroughly dry. Stir tins and ensure product is at room temperature before use. Enough Colour Tone should be purchased to complete the whole project and when more than one container is required it is advisable to mix them together before use. Various species of timbers will take colours differently, we strongly advise a small trial application prior to starting a project.
Application:
One coat of Colour Tone should brushed or rolled on. To ensure an even colour, remove excess product from the surface with a lint free cloth. Allow to dry - maintaining warmth and ventilation will enable the surface to dry within 3-6 hours. If excess product is not removed from the surface, Colour Tones will not dry properly! Once dry, seal with two coats of Treatex Clear Hardwax Oil which is available in Matt, Satin or Gloss sheen levels. The top coats of Clear Hardwax Oil are applied to prevent the natural pigments in our Colour Tones from wearing.
Tips:
All of our Colour Tones can be mixed. Treatex brushes and rollers are available. Alternatively, use a short gloss pile roller or good quality brush. Wet brushes and rollers can be cleaned using white spirit. To speed up drying, raise room temperature and increase air flow by opening doors, windows and using a fan. For a brighter white seal our Spruce Colour Tone with two coats to Treatex Natural Hardwax Oil instead of Clear Hardwax Oil.
Coverage:

1L will cover approximately 20m² in one coat (depending on the timber and method of application)

2.5L will cover approximately 50m² in one coat (depending on the timber and method of application)

Learn more

All about Treatex Colour Tone

Preparation:



Sand the surface to smooth bare wood using 80-120 grit sandpaper. Ensure that any previous finish has been fully removed. Remove dust, dirt and any other contaminates which may lead to uneven absorption of Colour Tones. Make sure the surface to be treated is thoroughly dry. Stir tins and ensure product is at room temperature before use. Enough Colour Tone should be purchased to complete the whole project and when more than one container is required it is advisable to mix them together before use. Various species of timbers will take colours differently, we strongly advise a small trial application prior to starting a project.



Application:



One coat of Colour Tone should brushed or rolled on. To ensure an even colour, remove excess product from the surface with a lint free cloth. Allow to dry – maintaining warmth and ventilation will enable the surface to dry within 3-6 hours. If excess product is not removed from the surface, Colour Tones will not dry properly! Once dry, seal with two coats of Treatex Clear Hardwax Oil which is available in Matt, Satin or Gloss sheen levels. The top coats of Clear Hardwax Oil are applied to prevent the natural pigments in our Colour Tones from wearing.

All of these Colour Tones can be mixed. Treatex brushes and rollers are available. Alternatively, use a short gloss pile roller or good quality brush. Wet brushes and rollers can be cleaned using white spirit. To speed up drying, raise room temperature and increase air flow by opening doors, windows and using a fan. For a brighter white seal our Spruce Colour Tone with two coats to Treatex Natural Hardwax Oil instead of Clear Hardwax Oil.

1L will cover approximately 20m² in one coat (depending on the timber and method of application)

2.5L will cover approximately 50m² in one coat (depending on the timber and method of application)

Treatex wood finishes are manufactured on a base of the following natural sustainable raw materials:

Greenshop Paints company reviews

We're really pleased that our customers have taken the time to share their feedback with us.

Feel free to read our reviews below or let us know about your experience!